Ubiquiti UISP Wave Nano 60GHz PtMP Station
The Ubiquiti UISP Wave Nano is a high-performance 60GHz PtMP station designed to connect to a Wave AP and deliver up to 2 Gbps total throughput (1 Gbps duplex). It features a built-in 5 GHz backup radio for connection continuity and Bluetooth for quick, simplified setup via the UISP Mobile app.
Key Features
- 60GHz PtMP station for high-throughput wireless links
- Up to 2 Gbps total throughput (1 Gbps duplex)
- 5 GHz backup radio for uninterrupted connectivity
- Link range: up to 5 km
- Router mode support
- Integrated GPS antenna
- Link planning support via ISP Design Center
- Bluetooth management for easy setup through the UISP App
- Supported mode: PtP only (as of firmware 3.2.0-beta2, two Wave Nano units can be used in a PTP configuration)
System Performance
| Parameter | Value |
|---|---|
| Maximum Throughput | 1.8 Gbps |
| Maximum Range | 12 km in US (UK range to be confirmed) |
| Encryption | WPA2-PSK (AES) |
| OS | airOS |
| Modes | PtP only |
| Services | UISP, Ping Watchdog, NTP Client, System Log |
| Utilities | Antenna Alignment Tool, Discovery Utility, Ping, Traceroute, Speed Test |
| Network Mode | Bridge Mode |
| Technology | WaveRF |
| Operating Frequency | 57 to 71 GHz (regulatory region dependant) |
| Channel Bandwidth | 2160, 1080 MHz |
| GPS | Yes |
Hardware & Mechanical
| Specification | Detail |
|---|---|
| Dimensions | 413 x 413 x 360 mm |
| Weight (without mount) | 1.5 kg |
| Weight (with mount) | 2.7 kg |
| Enclosure | Aluminium, UV stabilised plastic |
| Processor | Quad-Core ARM Cortex A7 |
| Memory | 256 MB DDR3 |
| Networking Interface | 10/100/1000 Mbps RJ45 Ethernet |
| RF Connections | Internal |
| Max. Power Consumption | 18 W |
Power & Protection
| Specification | Detail |
|---|---|
| Power Method | Passive PoE (Pairs 4, 5+; 7, 8-) |
| Power Supply | 48VDC, 0.65A Gigabit PoE Adapter (Included) |
| Supported Voltage Range | 48VDC ± 10% |
| ESD/EMP Protection | Air/Contact: 24kV |
Environmental & Certifications
| Specification | Detail |
|---|---|
| Operating Temperature | -40 to 60° C |
| Operating Humidity | 5 to 95% Noncondensing |
| Certifications | FCC, IC, CE |
LED Indicators
Power LED
- Flashing White: Bootup in progress
- White: Not connected to Ubiquiti® Network Management System (UISP™)
- Blue: Connected to UISP
Ethernet LED
- Flashing Blue: Ethernet traffic detected
GPS LED
- Blue: Receiving at least (4) GPS satellite signals
Management & Interface
- Management Interface:
- Bluetooth management for easy setup over UISP App
-
Web UI
-
Minimum Software Requirements:
- Modern web browser or Android/iOS smartphone
Box Contents
- UISP Wave Nano
- Pole mount
- Allen key
- 2 x M6 bolts
- Jubilee clip
- Wall mount + level
- 2 x wall plugs + M3.5 screws
- M3 bolt
- PoE injector
- UK power cable
- Alignment tool
Note: As of firmware 3.2.0-beta2, it is possible to use two Wave Nano units in a PTP configuration.
